Hadron X3

xKWAD Modular Frames

Not just another quadcopter frame release! xKWAD’s parts are future proof and crafted with a beautiful, unique and clever design. High Quality 3K twill 2×2 weave matt carbon fiber sheets are used for all xKWAD’s parts which are inspected and hand picked for CNC milling. All arms have chamfered edges to prevent delamination during crashes and all base frames come with selectable stack height from 20/25/30mm range to fit almost any electronic component out there that have a mounting size of 30.5mm x 30.5mm or 20mm x 20mm.

Rest assured that if you buy a base frame configuration, most of the parts* can be then ported over to a new xKWAD configuration frame build, just like that! xKWAD will keep releasing new parts to build new configurations in near future.

*Top and bottom plates are the two key components that differential between xKWAD configurations, but there are some combinations that you will need more than those two parts to complete a new build which are:

You own an X2 and you want to port parts to a new X3 configuration build?
You will need to buy the top and bottom X3 plates plus the WIDE 120mm arms to be able to run 5″ propellers.

You own an X3 and you want to port parts to a new X2 configuration build?
You will need to buy the top and bottom X2 plates plus any of the 110mm arm types if you want to lower the weight of the build but you can use the WIDE 120mm to run 6″, 5.5″ and 5″ propellers if you like!

You own an X1 and you want to port parts to a new X2 configuration build?
You will need to buy the top and bottom X2 plates and a pair of side plates according to the stack height your prefer.

Modular Hadron series frames

• CNC milling from 3K twill 2×2 weave carbon fiber
• Carbon fiber matt surface finish
• Chamfered edges on all arms
• True X design
• Two FC mounting sizes, 30.5mm x 30.5mm & 20mm x 20mm
• M3 self-clinching nuts for easier assembly
• Wide selection of side plates (if available)
• Easy arm swapping
• Universal 30.5mm x 30.5mm position on all top plates for 3D printed HD cameras mounts
• Wide selections of arm types
• Anti-slip battery adhesive rubber pads
• Adjustable stack height for all side plates
• 3D printed FPV micro camera mount with three mounting positions (if applicable)
• Holes for mounting Rx antennas using cable ties on top plates (if applicable)
• 3 mounting positions for the FPV camera on all side plates

Hadron X3

The X3 is the freestyler frame of the HADRON series. It has plenty of space to add electronic components and the second xKWAD base configuration frame that can accept side plates to a preferred stack height of 20/25/30mm sizes.

Frame specifications

• Motor to motor: 240mm True X
• Arms thickness: 4mm
• Top plate thickness: 2mm
• Bottom plate thickness: 2mm
• Bottom X brace thickness: 2mm
• Airframe weight: 120g ~ 134g (according to your selection)
• Motor: Supports 22xx – 23xx brushless motors
• FPV Camera: up to 28mm
• FC mounting: 30.5mm x 30.5mm & 20mm x 20mm (M3 screws)
• Propeller: Supports 5″ propellers

Includes

• 4x 4mm Arms (according to your selection)
• 1x 2mm X3 Top plate
• 1x 2mm X3 Bottom plate
• 1x 2mm Bottom x brace
• 1x 3mm Top battery adhesive rubber pad
• 6x M3x8mm button head screws
• 6x M3x8mm countersunk head screws
• 8x M3x10mm button head screws
• 4x M3x12mm button head screws
• 8x M3 black self-clinching nuts
• 8x M3 20/25/30mm black knuckle spacers
• 1x Side plates KIT – Flat, FPV Cam Protection, HD Camera mount (according to your selection)